Karcher HDS 1000 Be User Manual download pdf (Page 22)

– 3

 Danger

– Do not use high pressure cleaners

when there has been an oil spill; move

the appliance to another spot and avoid

any sort of spark formation.

– Do not store, spill or use fuel in the vi-

cinity of open flames or appliances such

as ovens, boilers, water heaters, etc.

that have an ignition flame or can gen-

erate sparks.

– Keep even mildly inflammable objects

and materials away from the silencer (at

least 2 m).

– Do not start the engine without the si-

lencer; check, clean and replace, if re-

quired, the silencer at regular intervals.

– Do not use the engine in forest, bushes

or grassy areas without fitting a spark

receiver at the exhaust.

– Except for setting jobs, do not run the en-

gine when the air filter is removed or there

is no cover over the suction support.

– Do not make any adjustments to the

regulator springs, regulator bars or oth-

er parts that can bring forth an increase

in the engine speed.

– Risk of burns! Do not touch hot silenc-

ers, cylinders or radiator ribs.

– Do not put hands or feet close to mov-

ing or rotating parts.

– Risk of poisoning! The appliance should

not be operated in closed rooms.

– Please follow the national rules and

regulations for fuel spray jets of the re-

spective country.

– Please follow the national rules and

regulations for accident prevention of

the respective country. Fuel spray jets

must be tested regularly and the results

of these tests must be documented in

writing.

– The heating appliance of the machine is

an ignition plant. All national laws and

regulations about heating systems must

also be followed.

 Danger

Risk of injury!

– Only use original high-pressure hoses.

– The high-pressure hose and the injec-

tion system must be suitable for the

maximum operating pressure given in

the Technical Data.

– Avoid contact with chemicals.

– Check the high-pressure hose daily.

Do not use hoses with kinks.

Stop using the high-pressure hose if the

external wire layer is visible.

– Do not use the high-pressure hose any-

more if the winding is damaged.

– Lay the high-pressure hoses in such a

way that no vehicle can drive over it.

– Do not use high-pressure hoses that

have been driven over, kinked, pressed

or bent even if there is no externally vis-

ible damage.

– Store the high-pressure hoses in such a

way that they are not subject to any me-

chanical load.

Safety devices serve for the protection of

the user and must not be put out of opera-

tion or bypassed with respect to their func-

tion.

The safety mechanism against lack of wa-

ter prevents the heater from over-heating

when there is no water. The burner oper-

ates only when there is adequate water

supply.

Safety instructions

General

High pressure hose

Safety Devices

Water shortage safeguard

22 EN

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 435 436

Comments to this Manuals

No comments