Karcher NT 14-1 Ap User Manual download pdf (Page 12)

– 2

1 Filter cover

2 Flat fold filter

3 Suction hose

4 Cable hook, rotating

5 Suction head lock

6 Wheel

7 Chassis

8 Dirt receptacle

9 Steering roller

10 Suction support

11 Chassis lock

12 Floor nozzle

13 Suction tube

14 Main switch

15 Carrying handle

16 Suction head

17 Electrodes

18 Filter frame lock

19 Filter frame

20 Bender

21 Exhaust filter

22 Suction pipe storage

23 Elbow intake

24 Crevice nozzle storage

25 Exhaust air outlet

26 Power cord

27 Nameplate

Caution

The flat pleated filter must always be in

place while vacuuming.

– To vacuum fine dust, you can also use

an additional paper filter bag or a fleece

filter bag.

Illustration

 Release and remove the suction head.

 Place the paper or fleece filter bag.

 Insert and lock the suction head.

Illustration

 Remove the brush strips.

 Install the rubber lips.

Note: The structured side of the rubber lips

must point outwards.

– To vacuum wet dirt, first remove the pa-

per or fleece filter bag.

– If the maximum liquid level is reached

the appliance will turn off automatically.

– In case of non-conductive liquids

(such as emulsion drilling fluids,

oils, and greases) the appliance is

not turned off when the container is

full. The filling level must be continu-

ously monitored and the container

must be emptied in time.

– After the wet vacuuming: Clean the

electrodes with a brush. Clean the con-

tainer with a damp rag and dry it.

Illustration

The suction hose is equipped with a clip

system. All C-35/C-DN-35 accessories can

be connected.

 Plug in the main plug.

 Switch on the appliance at the main

switch.

Device elements

Start up

Dry vacuum cleaning

Inserting the paper filter bag

Wet vacuum cleaning

Inserting the rubber lips

Remove the paper filter bag

General

Clip connection

Operation

Turning on the Appliance

12 EN

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 167 168

Comments to this Manuals

No comments