Karcher HDS 13-80 De Tr1 User Manual download pdf (Page 34)

PERIODIC SERVICE18

ENGLISH

BChecking coolant level, adding coolant

1. Remove the radiator cap, after the engine has

completely cooled, and check to see that coolant

reaches the supply port.

2. If the radiator is provided with a recovery tank, check

the coolant level of the recovery tank. When it is

between the "FULL" and "LOW" marks, the coolant

will last for one day's work.

3. When the coolant level drops due to evaporation, add

water only up to the full level.

4. Check to see that two drain cocks; one is at the

crankcase side and the other is at the lower part of the

radiator as figures below.

A If the radiator cap has to be removed, follow the

caution and securely retighten the cap.

A If coolant should be leak, consult your local KUBOTA

dealer.

A Make sure that muddy or sea water does not enter the

radiator.

A Use clean, fresh water and 50% anti-freeze to fill the

recovery tank.

A Do not refill recovery tank with coolant over the

"FULL" level mark.

A Be sure to close the radiator cap securely. If the cap is

loose or improperly closed, coolant may leak out and

decrease quickly.

(1) Radiator pressure cap

(1) Recovery tank (A) "FULL"

(B) "LOW"

(1) Coolant drain cock

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 243 244

No comments

Karcher HDS 13-80 De Tr1 User Manual Page 34