Karcher CV 66-2 User Manual download pdf (Page 11)

English 11

Î Bend the locking plate outward and pull

the bearing block out from the bottom.

Î Pull the brush roller off the driver and re-

move.

Î Pull the bearing block off the brush roller.

Note

The front and rear brush rollers are different.

In order to achieve the best cleaning effect,

the brushes must be installed correctly. The

correct assembly is indicated on the bottom

of the appliance:

The indicated part numbers (PN) are listed

on the driver side of the brush rollers.

Î Insert the bearing block onto the new

brush roller.

Î Insert the brush roller onto the driver and

turn until the driver pin locks into the

brush.

Î Insert the bearing block into the appli-

ance and push in far enough for the lock-

ing plate to lock into place.

Î Repeat process on the second brush

roller.

Note

Always replace brushes in pairs.

몇 Warning

Risk of injury. Pull the plug from the mains

before carrying out any tasks on the appli-

ance.

Î Plug in the main plug.

Î Check facility fuse.

Î Reset the brush drive fuse on the control

panel.

Î Gear defective, contact Customer Serv-

ice.

Î Reset the suction turbine fuse on the

control panel.

Î Reset the suction turbine fuse on the

control panel.

Î Filter bag is full; the indicator 'filter bag

full' glows. Replace filter bag.

Î Remove the brush rollers (see "Replace

brush rollers"), clean suction channel in

the brush head and check the suction

hose.

The warranty terms published by our com-

petent sales company are applicable in each

country. We will repair potential failures of

your appliance within the warranty period

free of charge, provided that such failure is

caused by faulty material or defects in fabri-

cation. In the event of a warranty claim

please contact your dealer or the nearest

authorized Customer Service center. Please

submit the proof of purchase.

– Only use accessories and spare parts

which have been approved by the manu-

facturer. The exclusive use of original ac-

cessories and original spare parts

ensures that the appliance can be oper-

ated safely and troublefree.

– At the end of the operating instructions

you will find a selected list of spare parts

that are often required.

– For additional information about spare

parts, please go to the Service section at

www.kaercher.com.

Troubleshooting

Appliance is not working

Brushes do not turn

Suction turbines do not run

Insufficient vacuum performance

Warranty

Accessories and Spare Parts

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 147 148

Comments to this Manuals

No comments