Karcher BD 80-120 W Bp Pack User Manual download pdf (Page 16)

- 5

Î Also press the switch for reverse drive

in addition to the drive switch.

Î Open the cover of the fresh water reser-

voir.

Î Fill fresh water (max. 60 °C) until 15 cm

below the upper edge of the tank.

Î Pour in detergent.

Î Close the cover of the fresh water res-

ervoir.

몇 Warning

Risk of damage. Only use the recommend-

ed detergents. With respect to different de-

tergents the operator bears the increased

risk regarding the operational safety and

danger of accident.

Only use detergents that are free from sol-

vents, hydrochloric acid and hydrofluoric

acid.

Follow the safety instructions for using de-

tergents.

Note

Do not use highly foaming detergents.

Recommended detergents:

Î Set the water quantity at the regulation

knob for water quantity according to the

dirt level and the type of flooring.

Î Lower the lever for lowering the vacu-

um bar downwards; the vacuum bar is

lowered.

Î Switch on the suction turbine using the

vacuuming switch.

Î Switch on the brush operations using

the brush operations switch.

The brushes will start automatically

when driven forward; at the same time,

the detergent solution is led in.

Î Lower the cleaning head using the

brush contact pressure switch.

Î Press drive switch.

Î Adjust the contact pressure using the

brush contact pressure switch while the

brushes are turning.

The contact pressure that has been set

can be read in the contact pressure dis-

play.

Note

Carry out initial cleaning attempts with low

contact pressure. Slowly increase the con-

tact pressure till the desired cleaning result

is achieved. Correctly set contact pressure

saves power and wear and tear of the

brushes.

Note

Very dirty floors can be cleaned in two

rounds. In the first work step, the detergent

liquid is applied and brushed in. The first

round is carried out with raised vacuum bar

and the suction turbine being switched off.

Further, the Aqua-Mizer

at the cleaning

head is also removed. The surface is

cleaned normally in the second step after

the detergent has worked normally.

Î Lift the cleaning head.

Î Turn key to "0" and remove it.

Î Open the lock of spray-guard.

Î Move both the spray-guard halves to-

wards the sides.

1 Aqua-Mizer unlocking lever

2 Aqua-Mizer

3 Unlocking lever for sliding brushes

Î Turn the unlocking lever of the sliding

brush in an anti-clockwise direction -

the brushes will fall downward and can

be pulled outward at the bottom of the

device.

Î Pull the unlocking lever of the Aqua-

Mizer towards the sides and remove the

Aqua-Mizer downward.

Î Re-insert the brush.

Î Repeat process on the opposite side.

Î Replace the spray-guard.

Î Switch off the brush drive.

Î Lift the cleaning head.

Î Briefly drive forward and suck of the re-

maining water.

Î Raise the vacuum bar.

Î Switch off the suction turbine after 5

seconds.

Î Set the key switch at the operator con-

sole to "0" and remove the key.

Î Charge battery, if required.

Caution

Please observe the local provisions regard-

ing the wastewater treatment.

Î Remove the dirt water drain hose from

the holder.

Î Lossen the toggle handle and remove

the stopper from the hose.

Î Lower the drain hose into a suitable col-

lector and drain off the dirt water.

Î Rinse the dirt water tank with clear wa-

ter.

Î Pull out the upper end of the fresh water

drain hose from the hose nipple.

Î Lower the drain hose into a suitable col-

lector and drain off the fresh water.

In case of danger of frost:

Î Empty the fresh and dirt water reser-

voirs.

Î Store the appliance in a frost-protected

room.

 Danger

Risk of injury! When loading or unloading

the machine, it may only be operated on

gradients of max. 10%. Drive slowly.

Caution

Risk of injury and damage! Observe the

weight of the appliance when you transport

it.

Î Remove brushes from the brush head.

Î When transporting in vehicles, secure

the appliance according to the guide-

lines from slipping and tipping over.

Caution

Risk of injury and damage! Note the weight

of the appliance in case of storage.

This appliance must only be stored in inte-

rior rooms.

 Danger

Risk of injury! Before carrying out any tasks

on the machine, set the main key to "0" and

remove it. Pull out the battery plug.

Î Drain and dispose of the dirt water and

the residual fresh water.

Caution

Risk of damage. Do not wash down the ap-

pliance with water and do not use aggres-

sive detergents.

Before starting working:

Î Check the inserts of the suction hose

for leaks.

Î Check the brushes for wear, replace if

required.

Reverse drive

Filling in detergents

Fresh water

Detergent

Application Detergent

Routine cleaning of all wa-

ter resistant floors

RM 780

RM 746

Routine cleaning of glossy

surfaces (e.g. granite)

RM 755 es

Routine cleaning and ba-

sic cleaning of industrial

floors

RM 69 ASF

Routine cleaning and ba-

sic cleaning of fine stone-

ware tiles

RM 753

Routine cleaning of tiles in

sanitary areas

RM 751

Cleaning and disinfection

in sanitary areas

RM 732

Removal of coating from

all alkali-resistant floors

(e.g. PVC)

RM 752

Removal of coating from li-

noleum floors

RM 754

Cleaning

Removing Aqua-Mizer

Shutting Down the Appliance

Drain off dirt water

Drain off clean water

Frost protection

Transport

Storage

Maintenance and care

Maintenance schedule

Daily

16 EN

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 243 244

Karcher BD 80-120 W Bp Pack User Manual Page 16

Comments to this Manuals

Karcher BD 80-120 W Bp Pack User Manual Page 16

Comments to this Manuals

Related products and manuals for Special machinery Karcher BD 80-120 W Bp Pack