HD 7/250 De Tr159633200 08/10
- 8Î Step 3: Press the F3 key to switch be-tween brightness and contrast.Î You can change the brightness and contrast levels with the F4 and F5 k
- 9Î Refill the antifreeze container with anti-freeze. Select the mixing ratio of the water/antifreeze as per the instructions of the antifreeze
- 10Danger–Maintenance Procedures may only be carried out by persons who have been in-structed in the safe operation and mainte-nance on the hig
- 111 Compressor2 Oil cooler module3 Air cooler module4 Cyclone separator5 2/2 way solenoid valve, 2-stroke6 Condensation drain, return to water
- 12NoteOnly trained personnel is permitted to add motor, gear and pump oil.NoteAlign the appliance horizontally prior to check the oil level in
- 13Pump and gearÎ The oil level is correct if it is within the markings on the oil dip.Î After the check, insert the oil dip and close the lid o
- 14DangerThis can lead to severe injuries and possi-bly death. An improper startup and repair of the appliance and the spray unit is danger-ous
- 15>Malfunction<High pressure sen-sorCable plug of high pressure sensor loose or short in connectionCheck for correct fit OperatorCable br
- 161Main fuseFaults without display on the consoleFault Cause Remedy By whomAppliance stops, dis-play switches offMain fuse is blown Replace the
- 17– Only use accessories and spare parts which have been approved by the man-ufacturer. The exclusive use of original accessories and original
02/10AE Karcher FZE, P.O. Box 17416, Jebel Ali Free Zone (South), Dubai, United Arab Emirates,+971 4 886-1177, www.kaercher.comAR Kärcher S.A., Urugua
- 1Please read and comply with these original instructions prior to the initial operation of your appliance and store them for later use or subse
- 2If the working pressure exceeds the max. permissible overpressure by approx. 10%, the burst disc will be destroyed and the wa-ter will circula
- 31 Towing hitch2 Tear-off rope3 Connector vehicle lighting4 Support wheel5 Battery6 Battery main switch7 Block wedge8 Oil dip pump gear9 Coveri
- 41 Display actual pressure2 Bar graph fuel level3 Bar graph water level in tank4 Display cooling water temperature5 Display oil pressure6 F6 ke
- 5Please observe Chapter "Safety Instruc-tions" and the enclosed safety instructions for high pressure cleaners (5.063-314.0)NoteThe d
- 6CautionDo not completely deplete the fuel in the fuel tank, otherwise, the fuel system will have to be ventilated. Possibly suctioned dirt fro
- 7Î Connect the water supply hose to the respective water inlet (arrow).Î Open the lock on the appliance cover and swivel the appliance cover up
Comments to this Manuals