Karcher K 7 Premium User Manual download pdf (Page 18)

– 8

8 High-pressure hose drum

9 Transport handle

10 Hand crank for hose drum

11 Storage of Plug 'n' Clean detergent bot-

tle with detergent connection

12 Storage for spray lance

13 Storage hook for mains connection ca-

ble

14 Mains cable with mains plug

15 Plug 'n' Clean detergent bottle with

locking lid

16 Bearing wheel

17 Trigger gun

18 Lock trigger gun

19 Key to detach the high pressure hose

from the trigger gun

20 Spray lance with Dirtblaster

For strong contaminations

21 Spray lance with pressure regulation

(Vario Power)

Carrying out the most common cleaning

tasks. The work pressure can be stage-

lessly regulated between "Min" and

"Max". You can add detergent when

"Mix" is selected.

In order to adjust the working pressure,

release the lever of the hand spray gun

and turn the spray lance to the desired

position.

———————————————–

Optional accessories

22 Washing brush

Suitable for use with detergents.

23 Delta-Racer D150

The Delta-Racer combines a wash

brush with a rotating high pressure jet.

Therefore, it is especially suited for vehi-

cle cleaning or heavily soiled surfaces.

24 Foam nozzle with detergent container

With powerful foam for effortless clean-

ing.

———————————————–

Not included in the delivery

25 Water supply hose

Use a fabric reinforced water hose with

a commercially available coupling. Min-

imum diameter 13 mm (1/2 inch); mini-

mum length 7.5 m.

Illustrations on fold-out

pages!

Mount loose parts delivered with appliance

prior to start-up.

Illustration

 Place the bottom holder into the recess-

es and push forward until it audibly

locks in.

Illustration

 Insert the top holder and push down all

the way.

Illustration

 Press in the storage hook and lock it

into the top position.

You will need the 2 included screws as well

as a Phillips screwdriver PH 2.

Illustration

 Insert both detergent hoses onto the

hose fittings.

 Install the dosage regulator and con-

nect using 2 screws.

Note: During installation you must

make sure that the tongues of the dos-

age regulator match up with the intend-

ed recesses in the casing.

Illustration

 Wind up the high-pressure hose on the

hose drum.

Illustration

 Slide the free end of the coiled high

pressure hose through the recesses on

the dosage regulator.

Illustration

 Attach the transport handle, insert the

bolts into the bores and screw them in.

Before Startup

Attaching the Accessories

Install the storage for trigger gun

Install the storage hook for the mains

connection cable

Install the dosage regulator for

detergent

Install the transport handle

18 EN

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 287 288

Comments to this Manuals

No comments