Karcher SC 2-500 C User Manual download pdf (Page 17)

– 8

 Illustrations on Page 2

1 Fill the water reservoir up to the "MAX"

marking.

2 Plug in the main plug.

Turn on the appliance.

3 Indicator lamp "heating on" is blinking

(green)

Wait until the indicator lamp (heater)

lights up permanently.

4 Connect the accessories to the steam gun.

The steam cleaner is ready to use.

 Illustrations on fold-out

page 3!

 Illustration

Insert steering roller and transport

wheels and lock them.

 Illustration +

Connect the required accessories (see

Chapter "How to use the accessories“)

to the steam gun. Insert the open end of

the accessory on the steam gun and

push onto the steam gun until the un-

locking button of the steam gun locks

into place.

 Illustration

Use the extension tubes if necessary.

To do so, connect one or both exten-

sion tubes to the steam gun. Insert the

required accessories on the free end of

the extension tube.

 Danger

Hot water may drip out of the accessory

parts while you are detaching them! Never

detach accessory parts while steam

streams out - risk of scalding!

 Move the selector switch for the steam

volume back (steam lever locked).

 Illustration

To detach the accessory parts, press

the unlocking button and pull the items

apart.

The water reservoir may be refilled at any

time.

Caution

Do not use condensation water from the

drier!

Do not fill with detergent or other additives

(for example fragrances)!

Do not use pure distilled water! Max. 50%

distilled water and 50% tap water.

Do not use collected rain water!

 Illustration

You can remove the water reservoir to fill it

or you can fill it directly on the appliance.

 Pull the water reservoir straight up.

 Fill the water reservoir up to the "MAX"

marking while positioned vertically un-

der the water tap.

 Insert the water reservoir and press

downwards until it arrests.

 Pour water from a container into the funnel

inlet. Fill up to the "MAX" marking.

 Place the unit securely on a firm surface.

 Insert the mains plug into a socket.

 Press the ON switch to turn on the ap-

pliance.

Note: If there is no or not enough water in

the steam boiler, the water pump starts and

supplies water from the reservoir into the

steam boiler. The filling process may take

several minutes.

 Wait until the indicator lamp (heater)

lights up permanently.

The steam cleaner is ready to use.

In case of water shortage, the indicator

lamp "water shortage" glows red in the wa-

ter reservoir and a signal can be heard.

 Fill the water reservoir up to the "MAX"

marking.

Note: The water pump tries to fill the steam

boiler in short intervals. If the filling process

is successful, the red indicator lamp goes

off.

Quick Reference

Operation

Attaching the Accessories

Removing the Accessories

Filling the Water Reservoir

Take off water reservoir

Directly on the appliance

Turning on the Appliance

Refilling Water

17EN

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 253 254

Comments to this Manuals

No comments