Karcher PUZZI 30-4 User Manual download pdf (Page 18)

– 6

 Replace the flat pleated filter at least

every 12 months with normal use, re-

place earlier as necessary.

Note: The flat pleated filter must be dis-

posed of in the residual waste.

 Unlock the bonnet, swivel it upwards

and snap it in place at the locking devic-

es.

 Unlock and remove the filter casing.

 Take out the flat folded filter.

 Unscrew the swimmer.

 Clean the fluff filter.

 Unscrew the fresh water sieve incl. the

lid.

 Clean the fresh water sieve.

 Unscrew the covering nut.

 Clean nozzle mouthpiece.

 DANGER

– Danger of injury by electric shock.

First pull out the plug from the mains be-

fore carrying out any tasks on the ma-

chine.

– Get the electrical components checked

and repaired only by authorised cus-

tomer service persons.

 Check the receptacle and the fuse of

the power supply.

 Check the power cable and the power

plug of the device.

 Turn on the appliance.

 Clean the fresh water sieve.

 Check the spray hose.

 Clean or replace nozzle tip.

 Clean nozzle mouthpiece.

 Check the bonnet for proper seating.

 Clean the seal of the bonnet and the

seating on the wastewater container.

 Clean the fluff filter.

 Check suction hose for blockages;

clean if required.

 Check the swimmer.

 Check for proper installation of the flat

pleated filter.

 Clean the flat pleated filter, replace if

necessary.

 Allow the flat pleated filter to dry, or in-

sert a new, dry flat pleated filter.

 Empty the wastewater reservoir.

 Prevent foam generation when adding

detergent RM 761 to the wastewater

container.

 Reduce the formation of foam by using

the defoaming agent dosing unit (op-

tional accessory).

If malfunction can not be fixed, the de-

vice must be checked by customer ser-

vice.

The warranty terms published by the rele-

vant sales company are applicable in each

country. We will repair potential failures of

your appliance within the warranty period

free of charge, provided that such failure is

caused by faulty material or defects in man-

ufacturing. In the event of a warranty claim

please contact your dealer or the nearest

authorized Customer Service centre.

Please submit the proof of purchase.

Clean the fluff filter

Cleaning the fresh water sieve

Cleaning the nozzle

Troubleshooting

Appliance is not working

Device is not sucking in detergent

Insufficient working pressure

Spray stream one-sided

Insufficient vacuum performance

Swimmer is interrupting the suction

air flow

Customer Service

Warranty

18 EN

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 231 232

Comments to this Manuals

No comments