Karcher K 4 Compact User Manual download pdf (Page 20)

– 11

Prior to extended storage periods, as dur-

ing the winter, also observe the instructions

in the Care section.

 Park the machine on an even surface.

 Press the disconnect on the trigger gun

and remove the high pressure hose

from the trigger gun.

 Push the casing of the quick coupling

for the high pressure hose toward the

rear and disconnect the high pressure

hose from the appliance.

Illustration

 Stow away the mains cable, the high-

pressure hose and accessory on the

appliance.

Caution

Appliances and accessories that are not

completely drained can be destroyed by

frost. Completely drain appliance and ac-

cessories and protect them against frost.

To avoid damage:

 Completely drain all water from the ap-

pliance: Switch the appliance on with

detached high pressure hose and de-

tached water supply (max. 1 minute)

and wait, until no more water exits at the

high pressure connection. Turn off the

appliance.

 Store the appliance and the entire ac-

cessories in a frost free room.

 Danger

Risk of electric shock. Turn off the appliance

and remove the mains plug prior to perform-

ing any care and maintenance work.

Prior to longer periods of storage, e.g. in

the winter:

 Remove filter from suction hose for de-

tergent and clean under running water.

 Pull out the sieve in the water connec-

tion using flat-nose pliers and clean un-

der running water.

The appliance is maintenance free.

You can rectify minor faults yourself with

the help of the following overview.

If in doubt, please consult the authorized

customer service.

 Danger

Risk of electric shock. Turn off the appliance

and remove the mains plug prior to perform-

ing any care and maintenance work.

Repair work and work on the electrical

components may only be performed by an

authorised customer service.

 Pull on the lever of the trigger gun; the

device will switch on.

 Check whether the voltage indicated on

the type plate corresponds to the volt-

age of the mains supply.

 Check the mains connection cable for

damages.

Voltage reduction due to weak mains sup-

ply or when using an extension cable.

 When switching on, first pull the lever of

the trigger gun and then switch the ap-

pliance switch to "I/ON".

 Check setting at the spray lance.

 Check water supply for adequate deliv-

ery rate.

 Pull out the sieve in the water connec-

tion using flat-nose pliers and clean un-

der running water.

 Appliance ventilation: Switch the appli-

ance on with the high-pressure hose

detached and operate (max. 2 minutes)

until the water exits the high-pressure

connection without bubbles. Switch off

appliance and reconnect high-pressure

hose.

Storing the Appliance

Frost protection

Maintenance and care

Care

Maintenance

Troubleshooting

Appliance is not running

Appliance does not start, motor

hums

Pressure does not build up in the

appliance

20 EN

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 273 274

Comments to this Manuals

No comments