Karcher SC 2-500 C User Manual download pdf (Page 19)

– 10

You can use the steam gun without any ad-

ditional accessories, e.g.:

– to remove odours and wrinkles from

hanging clothes by steaming them at a

distance of 10 to 20 cm.

– to remove dust from plants. Here, keep

a distance of 20-40 cm.

– for moist dusting, by briefly steaming

the cloth and wiping the furniture with it.

The closer this nozzle is to the contaminat-

ed area, the higher the cleaning effect, as

the temperature and the steam are highest

at the nozzle output. Especially suited for

cleaning difficult access locations, joints,

fittings, drains, sinks, toilets, blinds and

heaters. Heavy lime scale can be drenched

in vinegar prior to steam-cleaning. Let the

vinegar penetrate for about 5 minutes.

The round brush can be installed onto the

detail nozzle as an accessory. Attached

brushes can therefore be used to remove

heavy soiling.

Caution

Not suited for the cleaning of sensitive sur-

faces.

 Illustration

Attach the round brush to the detail nozzle.

Pull the terry cloth cover over the hand noz-

zle. Especially well-suited for small washa-

ble areas, shower stalls and mirrors.

Suited for all washable walls and floor cov-

erings, e.g. stone floors, tiles and PVC

floors. Work slowly on very dirty surfaces to

allow the steam to act on the dirt for a long-

er period of time.

Note: Detergent residue or care emulsions

that are still present on the surfaces to be

cleaned, can lead to smears when steam

cleaned. However, these will disappear

with repeated cleaning procedures.

 Illustration

Attach the floor cloth to the floor nozzle.

1 Fold the floor cloth the long way and

place the floor nozzle on top of it.

2 Open holding clamps.

3 Place the cloth ends into the openings.

4 Close the holding clamps.

Caution

Do not insert fingers between the clamps.

 Illustration

During work breaks, hook the floor noz-

zle into the parking holder.

 Danger

Always disconnect the mains plug and al-

low the steam cleaner to cool down before

performing any maintenance work.

Rinse the steam cleaner boiler at the latest

after 10 boiler fillings.

 Disconnect the mains plug from the

socket.

 Allow the steam cleaner to cool down.

 Empty the water reservoir.

 Remove the accessories from the ac-

cessory compartments.

Illustration

 Open the maintenance lock. For this,

place the open end of an extension pipe

onto the maintenance lock, lock it into

the guide and unscrew it.

 Fill the boiler with water and shake it

strongly. This dissolves lime scaling re-

siding on the boiler bottom.

 Completely empty the steam boiler to

remove existing water (see Fig. ).

As limes cale builds up on the boiler walls,

we recommend to de scale the boiler in the

following intervals (RF = reservoir fillings):

Steam gun

Detail nozzle

Round brush

Hand nozzle

Floor nozzle

Parking the floor nozzle

Maintenance and care

Rinsing the steam boiler

Descaling the Steam Boiler

Degree of hard-

ness

° dH mmol/l RF

I soft 0- 7 0-1,3 100

II medium 7-14 1,3-2,5 90

III hard 14-21 2,5-3,8 75

IV very hard >21 >3,8 50

19EN

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 265 266

Comments to this Manuals

No comments